Types, Terminology and Overview of V-Belts

V-Belts: Types, Terminology and Overview

Introduction

This article contains all the information you need to know about V-Belts.

Read further to learn more about topics such as:

What is a V-Belt?
Overview of Belt Drives
V-Belt Construction
V-belt Geometry Terminologies
Types of V-Belts
And much more��

Chapter 1: Understanding the V-Belt

The V-belt is a crucial and multifaceted component for power transmission between shafts. Its unique trapezoidal form ensures a secure fit within a shaft’s sheaves. This precise shape allows V-belts to nestle firmly into the grooves, improving contact and providing enhanced stability.

When tension is applied, vertical forces act perpendicular to the top surface of the V-belt, pressing its sides against the grooves of the sheave. As these forces increase, the belt is wedged more tightly into the sheave, boosting friction between the belt and the sheave surfaces. This stronger grip improves torque transfer and minimizes power losses caused by slippage.

The enhanced capability to handle larger loads stems from the numerous frictional forces at play. The efficiency of a V-belt significantly depends on how securely it engages with the sheave groove under heightened tension.

Vertical Force Creating Sidewall Force on a V-belt

V-belts are manufactured from a combination of synthetic and natural rubber, ensuring the flexibility and resilience needed for conformity to sheaves. These belts are built by compressing various fibrous tensile cords into the distinctive V-belt shape, endowing them with exceptional strength and longevity. Some V-belt types incorporate additional cogs to increase resistance to bending and lower operating temperatures.

Chapter 2: What is an Overview of Belt Drives?

Belt drives are essential mechanical systems used to transmit rotary motion and power efficiently between two or more parallel rotating shafts. These systems are a cornerstone of modern power transmission technology, widely utilized in industrial machinery, automotive applications, agricultural equipment, HVAC systems, and manufacturing processes. A belt drive system consists of a continuous looped belt mounted around pulleys affixed to the driving and driven shafts. The carefully set distance between pulleys ensures optimal belt tension, while the material composition and surface contact between the belt and pulleys produce the friction necessary for reliable grip and torque transmission.

In operation, the driver pulley spins and increases the tension on one side of the belt—called the "tight side"—resulting in a tangential force applied to the follower pulley. This transmits torque and rotational force to the driven shaft, effectively transferring mechanical power. The opposite segment, known as the "slack side," has reduced tension, balancing the system and helping prevent excessive stretching or slippage during operation. This arrangement allows belt drives to deliver smooth, flexible, and consistent power transmission for a vast range of industrial applications.

There are several types of belt drives available, each geared for specific applications and performance needs. The earliest belt drives were flat belts, often manufactured from leather or woven fabric. Historically, flat belt systems have been used in low-power setups, including vintage farm equipment, mining conveyors, and logging machinery. However, in high-torque or high-speed environments, flat belts tend to slip and disengage from pulleys, limiting their suitability for demanding industrial power transmission requirements.

Advancements in modern belt drive technology have revolutionized system performance, reliability, and service life. Newer flat belt designs incorporate advanced synthetic materials such as extruded polyamide, polyester, and aramid fibers, delivering excellent tensile strength, enhanced resistance to wear and abrasion, and reduced energy loss due to friction and slip. These innovations allow flat belts and other belt types to operate at higher speeds, support heavier loads, reduce shaft overloading, and improve overall system efficiency in industrial drives.

Historically, rope drives fabricated from cotton or hemp were paired with pulleys grooved in a V-pattern to prevent slippage, enabling power transmission over extended distances. This significant development paved the way for the introduction of round belts made from high-performance rubber, nylon, or urethane compounds, providing improved flexibility and operational endurance for heavy-duty industrial belt drive applications.

The most transformative milestone in belt drive engineering was the introduction of long-lasting elastomeric compounds—such as natural rubber, synthetic rubber, and other engineered polymers—that offer exceptional strength and fatigue resistance. These materials paved the way for advanced belt types including V-belts, ribbed belts, multi-groove belts, and timing belts (also known as toothed belts or synchronous belts). These innovative belts effectively address problems of slippage, alignment, and power loss experienced in earlier drive systems, and have become integral in conveyor belt systems, automotive engines, and high-precision equipment demanding reliable timing and synchronization.

Belt drives offer several advantages over alternative power transmission solutions—such as gears, chain drives, or direct coupling—making them a preferred choice in diverse industrial sectors:

Ability to absorb power fluctuations, shocks, and overloads: Since belt drives utilize friction-based coupling between the driver and follower pulleys, transient shocks or overload conditions can be safely dissipated through controlled slip. This feature protects sensitive machine components and helps prevent costly equipment failure by buffering sudden changes in load.
Versatile speed and torque adjustment: Belt drive systems enable easy alteration of operating speed and torque output by varying pulley diameters. This flexibility allows engineers to achieve the desired mechanical advantage and tailor rotational speed for specialized applications. The mechanical advantage of a belt drive is given by:
\begin{equation} \ MA = \frac{τ_b}{τ_a} = \frac{r_b}{r_a} = \frac{ω_b}{ω_a} \end{equation}

Where MA is the mechanical advantage, τb and τa are the torques, rb and ra are the radii of the pulleys, and ωa and ωb are the angular speeds. These equations apply under ideal conditions with negligible power transmission losses.
Low operational noise and vibration: Unlike gear drives and chain drives that generate significant noise due to metal-to-metal contact, most belt drives (excluding timing belts) run quietly, with minimal vibration and no backlash. The inherent elasticity and damping properties of rubber or fabric belts contribute to smooth, silent operation—ideal for HVAC systems, appliance drives, and office machinery.
Cost-effective over long distances: Belt drives present an economical solution for power transmission across longer spans. Since the incremental cost is primarily due to additional belt length, belt drives are less expensive to install and maintain compared to gear trains or chain and sprocket systems, particularly in applications involving remote, spaced-apart shafts.
Flexibility for non-parallel or offset shafts: The inherent flexibility of belts enables efficient connection between non-parallel or even slightly misaligned shafts—eliminating the need for costly couplings or complex gearing arrangements. This design adaptability is especially valuable in distributed conveyor systems, packaging machines, and custom industrial automation setups.
Adaptability for reversed rotation: With a simple "crossed belt" configuration, belt drives can reverse the rotational direction of the driven shaft, simplifying layouts where opposite shaft rotation is necessary—without requiring additional gears.
Accommodation of unaligned and offset pulleys: Belt drive systems can tolerate minor axial offsets and uneven shaft positioning. This versatility permits the use of multiple pulleys set side-by-side, providing variable follower speeds for dynamic production requirements.
Minimal maintenance and lubrication-free operation: Most belt drive systems do not require lubrication, unlike gears and chain drives. This greatly simplifies maintenance, reduces the risk of contamination, and is ideal for food processing, clean rooms, or pharmaceutical production environments.

However, belt drive solutions have their limitations and drawbacks:
Potential power loss and reduced efficiency: Traditional belt drives inherently lose some efficiency due to slippage, flexing of the belt, and frictional heat generation, making them less efficient than synchronous drives such as gear trains or high-precision chain drives. V-belt and synchronous timing belt designs have been engineered to address these power loss challenges and optimize energy transfer.
Lack of precision for synchronous applications: Regular belt drives cannot be used where precise, synchronized rotation or positioning is required. This challenge has been overcome by toothed timing belts, which prevent slippage and are widely employed in drives that demand exact alignment, such as automotive camshafts and high-precision manufacturing robots.
Defined operational speed range: The efficiency and reliability of belt drives decline at excessively high speeds due to issues like belt whipping, stretching, and increased vibration. At low speeds, slippage can become more likely as the available tensile force in the belt drops. Selecting the correct belt type and tensioning method is critical for optimal speed control and long-term reliability.
Reduced service life and vulnerability to environmental factors: Continuous stretching, repeated flexing, and abrasion during use contribute to wear and shorten the lifespan of belts compared to durable metal gears or chain drives. Furthermore, elastomeric belts may degrade rapidly under harsh temperatures, exposure to chemicals, or ozone, making routine inspection and preventive maintenance essential for industrial users.
Increased radial loads on shafts and bearings: Maintaining proper belt tension is necessary to reduce the potential for slippage, but excess tension exerts additional radial load on bearings and shafts. Over time, this can contribute to premature bearing wear, shaft deflection, and increased vibration—especially if not managed with best practices in drive alignment and maintenance.

Choosing the right belt drive system depends on a careful analysis of application requirements—including load capacity, desired speed ratios, drive distance, environmental conditions, energy efficiency, noise levels, and maintenance preferences. Leading manufacturers and suppliers offer a diverse selection of industrial belts and pulley solutions, including custom-engineered drive systems tailored for demanding industry sectors such as automotive manufacturing, food processing, packaging, and materials handling. Consulting with an experienced belt drive supplier or engineer can help ensure optimum power transmission reliability and cost-effectiveness for your specific mechanical drive application.

Leading Manufacturers and Suppliers

Chapter 3: How is a V-belt constructed?

A V-belt is constructed from a blend of natural and synthetic rubbers, along with various polymers, all reinforced for added strength. In operation, a V-belt experiences both tensile and compressive stresses. The upper side of the belt endures longitudinal tensile forces, while the lower side is compressed due to its interaction with the pulley grooves and the bending of the belt as it wraps around the pulleys. The belt's surface is made from materials that offer a high friction coefficient and enhanced wear resistance.

V-Belt Fabric Cover

The outer fabric layer of V-belts interacts directly with the sheave surface, designed to endure significant abrasion and resist contaminants. This fabric layer shields the inner elastomer and tension cords from exposure to chemicals, corrosion, and elevated temperatures.

Known as wrapped V-belts, these coverings provide a consistent appearance, texture, and smooth operation. A well-designed cover also reduces operational noise. The abrasion-resistant properties of the V-belt enhance its durability, especially since it typically contacts the sheave at high speeds.

Aside from the obvious benefits of texture and appearance, wrappings or coverings increase friction with the surface of the sheave to prevent slippage. When torque spikes happen, V-belts are forced to make an immediate response. Raw V-belts buckle and break under such conditions, while wrapped or covered V-belts will slip before sending power back to the gearbox or drive as a safety precaution.

V-Belt Tension Cord or Member

Tension cords, embedded within the rubber matrix of a V-belt, serve as the power-transmitting elements. Positioned at the pitch line of the belt's cross-section, they enhance tensile strength. These cords are typically made from materials like polyester, steel, or aramid fibers. In certain V-belt designs, the tension cord is securely bonded to the core using an adhesive rubber compound.

For added strength, tension cords are manufactured from continuous, joint-free materials such as wire, providing critical reinforcement and the tensile strength necessary to endure torque transmission.

V-belts are engineered to maintain high rigidity across their width, necessitating the use of tensile cords that distribute the load evenly. Flexibility in the tension cord is vital for reducing heat and stress during bending. This flexibility is achieved through the parallel alignment of the tension cords.

An adhesion gum holds the tension cord in place, creating a bond with the elastomer core, ensuring that all components work together as a cohesive unit.

V-Belt Elastomer Core

The elastomer core is integral to maintaining the structure of a V-belt, providing its characteristic trapezoidal cross-section. It is composed of various materials known for their shock absorption, high flexural strength, and thermal stability. Commonly used elastomers include neoprene, EPDM, and polyurethane.

In certain V-belt configurations, the elastomer core is split into two distinct sections, with the tension cord situated between a top rubber cushion and a bottom compression rubber layer. These sections are crafted from different rubber compounds to withstand the specific stresses they encounter.

Wrapped and Raw Edge V-Belts

V-belts are structurally divided into two main categories: wrapped belts and raw edge belts. Wrapped V-belts are traditional V-belts, fully encased in a fabric cover. These belts offer enhanced protection against external factors and operate more quietly. However, they have a lower coefficient of friction, which can result in some power loss. Wrapped V-belts are suitable for applications that may involve slight slippage without causing belt damage.

On the other hand, raw edge V-belts feature exposed flanks without fabric covers, allowing the elastomer core to directly contact the pulley surface. This exposure increases the belt's coefficient of friction, providing a better grip. The elastomer core in raw edge V-belts is more wear-resistant than in their wrapped counterparts. Raw edge V-belts can be further classified into three distinct types:

Raw Edge Plain (REP): With raw edge plain, the top surface is covered with one or more layers of a fabric cover with covering at the bottom side present or not, depending on the design.
Raw Edge Laminated (REL): Raw edge laminated types of v-belts are similar to REP but have additional layers of laminate fabric at the elastomer core. The addition of the laminated fabrics helps reduce noise.
Raw Edge Cogged (REC): Raw edge cogged, also known as raw edge notched V-belts, have cogs or notches at the bottom side of the belt. Cogs improve the flexibility of the belt, allowing use for pulleys with small diameters. The increased surface area at the bottom creates better heat dissipation, making them suitable for high-temperature applications.

Chapter 4: What is the terminology used for V-belt geometry?

The typical cross-section of a V-belt is trapezoidal, featuring parallel top and bottom edges. The specific dimensions of this trapezoid help determine the type of V-belt and are crucial for ensuring compatibility with the correct pulley.

In addition to the trapezoidal shape, V-belts are characterized by other geometric factors such as the pitch line location and the internal and external lengths. Knowing these dimensions is essential for choosing the right V-belt to match the application requirements accurately.

Top Width: This is the larger side of the trapezium, parallel with the shorter side.
Pitch Line or Pitch Zone: When bent, an unloaded v-belt experiences both tensile and compressive stresses. The outer side is subjected to tension, while the inner side is under compression. The line where the stress is zero is known as the pitch line or pitch zone.
Top to Pitch: This is the length between the top side and the pitch zone.
Pitch Width: This is the width of the trapezium measured at the pitch.
Height: This is the distance between the top and bottom sides of the trapezium.
Relative Height: Relative height is a non-dimensional characteristic that is defined as the ratio of the height to pitch width.
Outside Length: This is the circumference of the belt measured along the top side.
Inside Length: This is the length of the belt measured along the bottom side.
Pitch Length: This is the length of the belt along the pitch line.
Included Angle: This is the angle made by the flanks when extended. The included angle of most v-belt sections is 40°.

Chapter 5: What are the types of V-belts?

V-belts come in various types, and this section will categorize them based on the dimensions of their cross-sectional shape. The most prevalent cross-sections include standard, wedge, narrow, fractional horsepower, banded, cogged, and double. These dimensions are standardized by organizations such as ISO, BS, and DIN.

Standard V-Belt: The standard v-belt, also known as classical or conventional v-belt, is the earliest forms of V-belt and is widely used in power transmission. Standard v-belts have various dimensions designated as Y, Z, A, B, C, D, and E. When using DIN standards, their designation is denoted by numbers equal to the belt‘s top width in millimeters. All sizes have an included angle of 40° and a top width to height ratio of 1.6:1. The table below summarizes these designations.

Designation BS, ISO, IS, JIS	Designation DIN	Top Width in mm	Height in mm	Recommended Minimum Pulley Pitch Diameter in mm
	5	5	3	20
Y	6	6	4	28
	8	8	5	40
Z	10	10	6	50
A	13	13	8	13
B	17	17	11	125
	20	20	12.5	160
C	22	22	14	200
	25	25	16	250
D	32	32	19	355
E		38	23	500
	40	40	24	500

Wedge V-Belt: Wedge belts are a primarily used for high power transmission with reduced space requirements. They can operate at 1.5 to 2 times the load of classical v-belts with the same top width. Because of the higher power rating, fewer wedge belts are needed to transmit the load. Like classical v-belts, the included angle of wedge belts is also 40°, but they have a different top width to height ratio of 1.2:1. They have better cord construction and placement, providing the highest strength while in motion. Wedge belts are designated as SPZ, SPA, SPB, and SPC.

Designation	Top Width in mm	Height in mm	Recommended Minimum Pulley Pitch Diameter in mm
SPZ	10	8	63
SPA	13	10	90
SPB	17	14	140
SPC	22	18	224

Narrow V-Belt: Narrow belts are similar to wedge belts. They are also used for transmitting larger loads in a smaller form. The designations used for narrow belts are 3V, 5V, and 8V. The numbers denote the top width of the belt multiplied in terms of 1/8 of an inch. Like other belt sections, its included angle is also 40°. Narrow belt sections are standardized and mostly used in the North American region. They partially conform to the profile of a wedge belt. Section 3V corresponds to SPZ and 5V to SPB. 3V and 5V belts can be used for SPZ and SPB pulleys, respectively. However, using SPZ and SPB pulleys on American standard pulleys is not recommended.

Designation	Top Width in mm	Height in mm	Recommended Minimum Pulley Pitch Diameter in mm
3V	9.7 (3/8")	8	63
5V	15.8 (5/8")	14	140
8V	25.4 (1")	23	335

Double or Hexagonal V-Belt: These are similar to two mirrored v-belts with their top sides as the adjoining side. The tension cord is placed between the two V-shaped sections. Double v-belts are used for drives with one or more reverse bends since the two compression cores allow the belt to be bent from either side. This property makes double v-belts suitable for drives with multiple pulleys that must be driven either clockwise or anti-clockwise. Double v-belt sections are designated as AA, BB, and CC.

Designation	Top Width in mm	Height in mm	Recommended Minimum Pulley Pitch Diameter in mm
AA	13	10	80
BB	17	14	125
CC	22	17	224

Banded V-Belt: A banded belt is several v-belts joined together in parallel by a fabric cover or band at the top side. Each V-section can have the dimensions of classical, wedge, or narrow belts. Banded belts are mostly used in high-power applications. They are designated by an H followed by the v-belt section number. Examples of banded v-belts are HA, HB, HSPA, HSPB, H3V, and H5V.

Fractional Horsepower V-Belt: These types of v-belts are used for light-duty applications. Examples of such applications are household appliances and machine shop equipment where the power requirement is about 1 horsepower or less. Common fractional horsepower belt sections are 2L, 3L, 4L, and 5L. The number before the L denotes the top width of the belt multiplied in terms of 1/8 of an inch.

Designation	Top Width in mm	Height in mm
2L	1/4	1/8
3L	3/8	7/32
4L	1/2	5/16
5L	21/32	3/8

Cogged V-Belt: As discussed earlier, these belts have cogs or notches at the bottom side, which allows them to be bent at a smaller radius. They are not fully wrapped with fiber cover, unlike the previous types. Cogged belts can take the cross-section dimension of classical, wedge, narrow, banded, and fractional horsepower v-belts. Cogged belts are designated with an X after the v-belt section number, except for wedge belts. Example designations are ZX, AX, 3VX, 5VX, HAX, H3VX, etc. Cogged wedge belts are designated as XPA, XPB, and so on.
Double Cogged V-Belt: This design has the combinations of principles behind a double v-belt and a cogged v-belt. They are used in applications that require high belt flexibility for a small pulley radius. The cogged construction at the top side of the belt allows it to be bent in a serpentine-like path. This is used for driving multiple pulleys. Double cogged v-belts dimensions depend on manufacturer standards.
Agricultural V-Belt: These are wrapped belts designed for more extreme abrasion from dust, sand, grains, and others. Also, they are exposed to rain and sunlight, which can easily degrade ordinary rubber compounds. Because of these, agricultural v-belts are made of more durable polyurethane blends for the elastomer core and Kevlar fibers for the tensile cords. Some manufacturers mix their specifications with classical, narrow, double, and banded section v-belts. When referring to ISO standards, agricultural v-belts are designated as HI, HJ, HK, HL, and HM.
Poly-V Belt: Poly V is the common market term for V-ribbed, multi-groove, or poly-groove belts. Unlike banded v-belts, they do not have the standard section dimensions of classical, wedge, and narrow v-belts. They have a more compact construction than banded v-belts. They have improved flexibility because of their reduced thickness, making them suitable for driving multiple pulleys. Poly V-belts can take a serpentine path with the help of idlers. Poly V-belts are designated as PH, PJ, PK, PL, and PM.
Variable Speed V-Belt: This is a raw edge cogged v-belt with a wider cross-section than classical belts. They are designed to be used with variable speed pulleys. Their section can be made into standard or non-standard sizes. Designations for variable speed belts vary from each manufacturer. They are usually made from chloroprene rubber (Neoprene) or EPDM.

Conclusion

A v-belt is a flexible machine element used that transmits power between a set of grooved pulleys or sheaves. They are characterized by their trapezium cross-section.
V-belts are used because of their ability to wedge tightly into the grooves of the pulley. This breaks higher surface friction, reducing slip and power loss.
V-belts can be classified as wrapped or raw edge belts. Wrapped v-belts are fully covered with a fiber cover, while raw edge belts have bare flanks.
V-belts can also be categorized according to the cross-section. The most common cross-sections are standard, wedge, narrow, fractional horsepower, banded, cogged, and double.