This article contains everything you need to know about temperature chambers.
You will learn:
A temperature chamber is an advanced environmental control instrument crafted to mimic the range of conditions a product may face throughout its lifecycle. These high-tech devices are capable of replicating different hazards, usage scenarios, and atmospheric states to evaluate a product's resilience. By simulating the aging process, temperature chambers help forecast a product's lifespan and functionality under set usage conditions.
Temperature chambers enable manufacturers to determine how a product will behave under extreme circumstances before it hits the consumer market. This function aids in preventing the release of products that might not satisfy customer expectations due to unforeseen adverse situations.
Temperature chambers—also known as environmental test chambers or climatic chambers—employ advanced techniques to generate controlled environments with varying heat levels, temperature gradients, and humidity conditions. These chambers are designed to simulate a wide range of atmospheric scenarios, from extreme cold to intense heat, to test the durability and performance of materials, components, and products. Manufacturers may select from different technologies, such as air-cooled or liquid-cooled systems, to align with specific application requirements, energy efficiency standards, and customized testing protocols. Consequently, many suppliers offer multiple design options and features—such as programmable controllers, rapid ramp rates, and integrated humidity systems—to accommodate the diverse and evolving needs of industries such as electronics, automotive, aerospace, pharmaceuticals, and defense.
Temperature chambers are crucial for environmental testing, as they evaluate the long-term and short-term effects of a broad spectrum of temperature exposures and thermal cycling on products and materials. By replicating harsh environmental conditions, these chambers help engineers and quality assurance teams understand how materials react to fluctuating temperatures, extreme cold, high heat, and varying humidity levels. Testing methodologies may be static (steady-state), to observe gradual changes over time, or dynamic (cycling/thermal shock), to induce and analyze potential failures or degradation. This performance data is vital in determining a product’s reliability, compliance with regulatory standards (such as MIL-STD or IEC), and overall quality before market release.
Modern temperature chambers, or environmental test chambers, perform thermal and climatic tests primarily through forced air convection and, in some cases, liquid nitrogen or carbon dioxide cooling. The chambers function much like sophisticated ovens, but with precise digital control systems that monitor and regulate environmental parameters. Essential components include insulated enclosures, high-precision sensors, PID temperature controllers, and powerful fans and motors to circulate air uniformly throughout the test space.
Thermal testing involves multiple techniques designed to assess the resilience, safety, and performance of products under extreme environmental stress. The three core testing methods are thermal cycling, burn-in, and thermal shock. Each method serves a unique purpose in environmental simulation and product validation:
Thermal cycling involves a controlled process where the chamber alternates between high and low temperature extremes according to a programmed test profile. The temperature setpoints, ramp rates, and dwell times (known as “soaks�) are carefully regulated to minimize thermal stress, allowing the part or assembly to reach equilibrium at each stage. This process is essential for identifying failure mechanisms such as material fatigue, thermal expansion/contraction, delamination, or changes in electrical performance. By subjecting components to repeated cycles, manufacturers can predict lifespan, ensure compliance with industry standards (e.g., JEDEC for electronics), and reduce the risk of latent defects reaching the end user.
The burn-in test is a key quality assurance procedure involving the exposure of a component or system to a fixed, elevated temperature (sometimes accompanied by continuous electrical load or cycling) over an extended duration. This test detects early failures (“infant mortality�), verifies overall stability, and eliminates unreliable units prior to field deployment. Burn-in testing relies on precise temperature control, real-time data logging, and reliable monitoring of electrical and mechanical characteristics throughout the process.
Burn-in testing is widely adopted across technology-intensive sectors including semiconductor device manufacturing, automotive electronics, telecom equipment, aerospace avionics, and military systems, where mission-critical reliability is non-negotiable. By proactively identifying weak components, manufacturers can significantly reduce warranty claims, improve product lifespan, and meet international quality standards such as ISO 9001 and AEC-Q200.
While thermal shock testing and cycling share the goal of assessing environmental resilience, thermal shock testing is characterized by abrupt—often extreme—temperature transitions within seconds or minutes. This simulates real-world scenarios such as aerospace reentry, automotive cold starts, or the sudden exposure of pharmaceuticals and medical devices to temperature variations during transportation.
Thermal shock testing delivers the most rigorous evaluation of a product’s durability by rapidly transferring test samples between hot and cold zones (often at rates of 30°C per minute or higher). This process is critical for verifying the integrity of packaging materials, glass, solder joints, circuit boards, aerospace hardware, and military-grade electronics when exposed to mechanical and thermal stresses. Testing can be performed in two-zone (hot/cold) or three-zone (hot, ambient, cold) chambers, each replicating distinct real-life use cases and failure modes.
There are three possible forms of thermal shock chambers, which are defined by the number of zones they have. The two zone version carries parts in a basket between the set temperature extremes. In the two zone double capacity version, there are two hot zones with one cold zone that is constantly in use. The three zone version has dedicated hot, cold, and ambient temperature zones for expanded testing flexibility.
An AGREE test chamber (named after the Advisory Group on Reliability of Electronic Equipment) is a specialized environmental simulation device that integrates vibration testing with temperature and, in some cases, humidity cycles. Developed for military and aerospace applications, AGREE chambers enable comprehensive reliability testing by subjecting products to simultaneous mechanical and climatic stressors. This dual-mode approach uncovers potential weaknesses in electronic, electromechanical, or structural components, ensuring robust performance in real-world operating environments.
When evaluating temperature chambers for your application, it is important to consider factors such as temperature range, ramp rate, chamber size, humidity control, energy efficiency, control system interface, data logging capabilities, safety features, and compliance with industry-specific standards (e.g., ASTM, IEC, MIL-STD). Leading manufacturers also offer customizable solutions to accommodate specific test protocols, regulatory requirements, and production workflows. Investing in an advanced temperature or environmental chamber helps ensure product quality, regulatory compliance, reduced time to market, and greater customer satisfaction.
For more insights on selecting the best temperature chamber for your needs, review product datasheets, request quotations from reputable suppliers, and consult with industry experts to ensure your equipment matches both current and future test requirements.
Manufacturers utilize temperature chambers to rigorously test their products prior to market release, particularly for those requiring high quality and durability. These chambers can recreate various environmental conditions to simulate potential scenarios a product might encounter. The advantage of using temperature chambers lies in their ability to create and control specific conditions in a contained environment.
Various industries depend on the insights provided by these test chambers. The design and size of the chambers vary according to the needs of different sectors, including semiconductors, automotive, cement, food, and pharmaceuticals. Often, the design and functionality of the test chambers are customized to meet the specific requirements of each industry or client.
A key test for rubber involves evaluating its performance at low temperatures, particularly in cold climates. The temperature retraction test measures the elasticity of rubber when exposed to extreme cold. In this test, rubber is stretched and then frozen using liquid nitrogen, after which its retraction properties are assessed.
Among the five rubber categories—general, high performance, oil resistant, high temperature, and low temperature—only three are suitable for extreme environmental conditions with severe temperature fluctuations.
To ensure reliable performance under harsh conditions, rubber materials are subjected to a range of temperature tests. Although rubber is generally durable and strong, it can still degrade when exposed to varying atmospheric conditions.
Pharmaceutical products can suffer significant damage if exposed to improper temperatures, leading to a degradation of their properties. Such temperature-induced decomposition can greatly reduce a drug's effectiveness, resulting in medications that fail to perform as expected.
To identify the temperature limits that pharmaceuticals can tolerate, they undergo a series of tests in temperature chambers. These tests provide essential baseline data and warnings about temperature sensitivity. In some cases, it may be necessary to maintain a constant temperature throughout the shipping, usage, and storage of these products.
The increasing demand for enhanced safety, performance, fuel efficiency, and durability has led to a surge in the use of electronic components in the automotive industry. Automotive electronics encompass semiconductors, sensors, and various sub-systems, with modern vehicles incorporating up to fifty different sensors, switches, and electronic controls.
To verify the reliability of these electronic components, they are subjected to testing in temperature chambers with a temperature range spanning from -80°C to 225°C or more. These tests can be conducted in either benchtop chambers or drive-in chambers, allowing for the simultaneous evaluation of multiple components under extreme conditions.
Larger components, such as engine parts, batteries, and airbags, are also tested to ensure they can withstand harsh and demanding environments.
Temperature chambers used in the electronics industry are specifically designed to test integrated circuits (ICs), circuit boards, semiconductors, transducers, drives, and power supplies. These chambers are engineered to replicate a wide range of atmospheric and environmental conditions to thoroughly assess electronic components.
Given the fast-paced nature of the electronics market, there is a constant need for quick responses. Temperature chambers deliver immediate data on the durability and lifespan of components. This data is crucial for evaluating a product's reliability and viability before it reaches the market.
The medical industry is subject to rigorous regulations concerning the manufacturing, shipping, and design of its products. These regulations are imposed by national and local authorities to ensure public safety and protect health.
These stringent standards extend to the testing equipment used for medical products. Agencies such as the Food and Drug Administration (FDA) have established guidelines detailing how medical products should be evaluated to ensure compliance.
Testing medical equipment also involves assessing protection against contaminants, which includes evaluating packaging integrity. Additionally, the shelf life of equipment is scrutinized to determine how long it can be stored before it must be replaced.
Medical equipment tested includes devices like respirators and ventilators, which have direct patient contact and must meet high standards of safety and reliability.
The primary goal of testing military equipment is to evaluate its performance under the most extreme conditions. These tests assess how well a product withstands harsh environments and its expected longevity, which are crucial factors for soldiers operating in challenging conditions.
Manufacturers supplying products to the military must adhere to MIL-STD (military standard) specifications for aerospace and automotive equipment. These standards provide detailed guidelines on the temperature ranges that equipment must endure to be deemed acceptable.
In various industries, temperature chambers are crucial, particularly for telecommunications, where they help assess the longevity of products like cell phones. These devices are exposed to diverse conditions and are used as both communication tools and computing devices, making rigorous testing essential.
The telecommunications industry follows precise testing guidelines outlined by Telcordia standards. Telcordia has established widely recognized benchmarks that cover various categories of telecommunications equipment, ensuring that products meet industry-specific requirements.
Products tested in this sector include cell phones, switches, connectors, fiber optics, line protectors, and network interfaces. With the rapid growth in demand for telecommunication products, companies must conduct thorough testing to comply with public expectations and regulatory standards.
Testing is conducted according to Telcordia specifications, which are designed to simulate the conditions that products will face, including shipping and storage environments. These standards mandate testing at temperatures as low as -40°C to ensure product quality and reliability.
Customers of testing chambers develop their own specifications based on Telcordia requirements tailored to their specific products.
When assessing the weathering effects on plastics, several factors are evaluated, including the type of polymer, its color, and any additives present. Tests simulate various climatic conditions, such as desert environments and sunlight exposure, to understand how these elements impact the material.
Plastic testing is typically tailored to the specific application of the product, which may include composite plastics used in decking, vinyl siding, and automotive components. The temperature to which plastic is exposed affects its chemical stability, appearance, and physical properties.
By subjecting plastics to temperature variations, researchers can gauge their rate of degradation and predict their service life. While traditional outdoor testing has been used to evaluate plastic stability, many manufacturers are now opting for temperature chambers. These chambers offer more precise data and faster results.
Lighting products must withstand extreme weather conditions to ensure reliable performance. For example, automotive headlights need to function properly in both scorching desert heat and frigid sub-zero temperatures. To verify their durability and effectiveness, lighting systems are tested under some of the harshest environmental conditions.
Light-emitting diodes (LEDs) are increasingly popular due to their energy efficiency and longevity. However, to maximize their benefits, LEDs must operate effectively in extreme conditions. They are crucial for applications such as aviation and automotive lighting. To guarantee their reliability, LEDs undergo rigorous testing in temperature chambers that simulate the most challenging environments.
A temperature chamber is a general term for a device that performs various environmental tests. High or excessive temperatures are frequent causes of product failures, making it essential to test both new and existing products under such conditions.
Temperature chambers conduct tests that reveal how products respond to extreme temperature fluctuations and high humidity levels. These tests help define the limits of product design and identify potential defects or premature failures.
Temperature chambers are adaptable tools that can replicate a wide range of real-world environmental conditions.
One primary function of a temperature chamber is to test products under extreme temperatures and assess their effects. Temperature chambers are not limited to a specific temperature range; instead, they are designed according to the testing requirements and the products being evaluated. Commonly, temperature chambers can simulate ranges from -78°C to 150°C.
Rapid cycling, where temperature changes occur every minute, can offer valuable insights into a product's resilience under fluctuating conditions. This type of testing is particularly relevant for assessing performance during shipping or in unstable climatic environments. Thermal shock tests are frequently conducted on electronics, especially those used in the aerospace sector, to ensure their durability and reliability.
Temperature chambers are crucial for testing humidity, as varying temperature gradients are essential for controlling humidity levels. By combining heat and moisture, these chambers create specific humidity conditions, allowing for precise simulation of environmental factors affecting water molecules in the air.
Temperature testing is a critical component of altitude testing due to the rapid temperature variations that occur as vehicles ascend through the atmosphere. Temperature chambers can replicate these temperature shifts at different altitudes, providing valuable data on how a product withstands these environmental changes.
Accelerated weathering involves simulating various weather conditions that a product might face during its lifecycle. This includes everything from typical weather patterns to extreme seasonal events like severe storms and natural disasters. By controlling and replicating these conditions, accelerated weathering provides rapid and precise data on a product’s stability and durability.
The data gathered reveals how a product responds to factors such as light, heat, drastic temperature changes, and seasonal variations across different regions. Temperature chambers equipped with advanced technology can instantly and accurately recreate a wide range of weather scenarios for thorough testing.
Temperature chambers come in a wide range of sizes, from compact models that can fit on a shelf to large units that occupy an entire building. Key considerations in selecting a temperature chamber include the available space and the specific conditions that need to be simulated.
While generic test chambers are available for purchase, most customers opt to collaborate with manufacturers to design a chamber tailored to their specific needs. Each customer has unique testing requirements, and the chosen chamber must be customized to meet those precise criteria.
Portable temperature chambers deliver high performance in a compact design. They are easy to set up, consume minimal power, and operate with low noise while still providing the essential features of larger models. Despite their smaller size, these portable units are capable of generating temperatures ranging from -70°C to over 150°C.
Benchtop temperature chambers, similar to portable models, provide an economical solution for temperature testing with a compact design. They are specifically intended for testing smaller components such as sensors, computer circuit boards, and cell phones. Despite their size, these chambers are ideal for small-scale research and development. Benchtop models typically range from 0.89 cubic feet to 5.5 cubic feet in capacity and can simulate temperatures from -68°C to 180°C.
Reach-in test chambers are larger than benchtop models and are designed to be placed on the floor, often equipped with casters or wheels for easy mobility. They offer a greater capacity while maintaining a compact footprint. These chambers typically range from 10 to 64 cubic feet in size and can simulate temperatures from -68°C to 180°C. Reach-in test chambers also feature a temperature variation of ±1.0°C.
As the name implies, walk-in temperature chambers are larger and designed for several or large parts. They can be modular and delivered as a single unit or constructed on site. The majority of walk-in chambers are custom designed to meet the needs of the customer. Panel walk-in chambers have lightweight insulated panels that are quick and easy to install, while solid walk-in chambers have welded walls for a perfect seal.
Walk-in temperature chambers are available in a diverse range of sizes, from 286 cubic feet to over 1400 cubic feet. While these dimensions are typical, many walk-in chambers are custom-designed and engineered to meet specific needs. Depending on their configuration, they can offer a temperature range from -40°C to 150°C.
Drive-in temperature chambers are designed to test automotive components and fully assembled vehicles. While individual parts might be tested in smaller chambers, drive-in models enable manufacturers to assess how parts perform together within a complete vehicle.
Like walk-in chambers, drive-in temperature chambers come in various sizes, ranging from those that fit compact cars to those large enough for long-haul trucks. The size and specifications are customized based on the automaker's requirements.
These chambers often include a PID control system, which is standard in most testing chambers. However, for drive-in models, the system's applications are typically more specialized to meet precise data needs.
A key purpose of drive-in chambers is to evaluate the effects of environmental conditions on vehicles. They allow manufacturers to replicate and accelerate various weather scenarios, providing insights into how vehicles endure extreme and variable weather conditions.
Typically, environmental test chambers are customized to meet the specific needs and requirements of each customer, as different industries have unique testing demands. Despite the variations and specializations, all test chambers share common elements such as construction materials, doors, sealing components, air circulation systems, and controllers. However, the controllers may differ based on the conditions being monitored and the precision required for the tests.
Temperature chambers typically feature exterior walls made of steel with an inner lining of stainless steel, often of grade 304 or 306. These materials are selected for their durability and resistance to corrosion. The construction of these chambers is designed to withstand the rigorous demands of various testing processes, ensuring long-term reliability and resilience.
Temperature chambers are insulated between the steel exterior and stainless steel interior panels. Various types of insulation materials are employed, including silicone, fiberglass, and polyurethane. Polyurethane is commonly chosen for its low thermal conductivity and superior performance as a thermal insulator.
Door construction in temperature chambers is crucial for ensuring a tight seal and robust durability to endure frequent use. Doors are equipped with full-action clamps that securely hold them in place. Like the walls, doors feature sealing materials to prevent contamination from external elements. Many chambers include a double-paned window made of glass or clear polymer, which is also sealed to maintain chamber integrity. Larger chambers may have multiple doors, each with double seals to enhance performance.
For larger chambers, additional features such as defoggers or heating cords are often included to prevent condensation on the windows.
The sealing materials used for windows and doors in temperature chambers may include silicone rubber, specific polymers, or standard rubber. These materials are selected for their high-temperature resistance, durability over time, and effective sealing properties. Chambers intended for low-temperature testing often incorporate double seals to ensure optimal performance.
Controllers are among the most essential components of a temperature chamber, available in various types, programming options, and configurations. A crucial attribute of a controller is its ability to maintain the specified conditions with minimal deviation.
Accuracy and reliability are paramount for controllers. They must be straightforward to configure and versatile enough to handle different products and testing conditions. Controllers should strike a balance between precise data management and user-friendly programming. Most controllers come equipped with a color LCD display and numerous application features, and they typically include a USB port for convenient data transfer and computer compatibility.
Effective airflow is crucial for the optimal performance of a temperature chamber. It ensures that the temperature gradient is consistently maintained across all areas of the chamber. To achieve this, temperature chambers are equipped with robust motor-driven blowers or axial fans that facilitate even air distribution throughout the space.
Temperature chambers employ various cooling methods depending on their size and requirements. Smaller chambers typically use air-cooled condensers to dissipate heat. In contrast, larger chambers often necessitate more advanced cooling systems, such as water or nitrogen cooling.
Some systems utilize refrigeration to cool both air and water before entering the chamber, offering a cost-effective alternative to water cooling systems. Although antifreeze is sometimes added to water to extend the temperature range, it is generally less efficient compared to other cooling methods.
Temperature chambers generate heat using Nichrome wire heaters, which are looped to maximize heat production. Airflow within the chamber circulates this heat to ensure even distribution and prevent direct exposure of samples to radiant heat.
Additional heating methods in temperature chambers include gravity convection, fan-driven convection, and circulating water baths.
Nichrome Heating � Nichrome is used as a heating element because it is so resistant to electricity. It is used in small products like hair dryers as well as industrial furnaces.
Gravity Convection: This method relies on the natural flow of heat, where hot air rises and circulates gently throughout the chamber. It provides uniform heating without the need for mechanical force.
Fan or Forced Air Convection: This method uses fans to actively circulate warm air around the chamber, ensuring more uniform heat distribution.
The maximum temperature a chamber can achieve is constrained by the materials used in its construction, as certain insulation materials have limits on the temperature ranges they can withstand.
Temperature induces stress in products, a factor every product encounters throughout its lifecycle. The significance of temperature varies depending on the product, with electronics typically experiencing more temperature-related stress due to their operational nature.
Several temperature tests can assess a product's viability. Common tests include high and low temperature tests, thermal cycling, thermal shock, and combined temperature and humidity testing.
High temperature testing can identify several critical factors related to a product's performance and durability. These include:
A wide array of agencies, organizations, and groups, including both voluntary and governmental entities, oversee the standards and regulations for temperature chambers. Given the critical importance of precise testing, manufacturers are meticulous in adhering to these requirements.
Manufacturers of testing equipment serving industries such as food, medical, pharmaceutical, and military must comply with specific standards tailored to each sector. These stringent guidelines ensure that their products meet the necessary performance and safety criteria.
The FDA's regulations are not directly specific to temperature chambers themselves but focus on the food equipment tested within these chambers. They outline the types of acceptable tests required to validate the safety and performance of food production equipment before it can be sold.
The ISO has established qualifications for acceptable testing methods across a broad spectrum of products. As an internationally recognized organization, it is acknowledged by most countries. The ISO provides a detailed list of requirements regarding testing practices and procedures.
Some of the ISO standards include:
The AAMA focuses on weather testing procedures for coatings, specifically detailing the performance requirements for coatings applied to windows and doors.
The AATCC provides standards for testing methods and quality control in the textile and clothing industries.
Some of the key ASTM codes include:
Like other standards organizations, the military enforces a comprehensive set of specific requirements for hardware producers. Notably, military testing standards are highly detailed, specifying exact temperatures, testing durations, and precise criteria for acceptable performance and failure points.
Temperature chambers used for testing automotive components are governed by stringent safety and quality standards. The list of regulations is extensive and comprehensive, with updates provided by the SAE as new design developments emerge. Below is a brief overview of some of the key standards:
An altitude chamber is a test chamber that is designed to simulate the altitude, vacuum, and temperature of environmental conditions at heights that match the flight patterns of all forms of aircraft, from commercial to military...
A climate chamber is an enclosed space that provides a controlled set of circumstances for testing the impact of various environmental and climatic conditions on industrial goods, commercial products, electronic devices, materials, and biological matter...
A cold room is a temperature controlled environment that is capable, through refrigeration, to create conditions for storage, experimentation, and preservation of foods, equipment, and medical supplies. The types of cold rooms are...
An environmental chamber is an enclosure used to test the effects of a variety of conditions on a product, component, part, or assembly. These highly technical pieces of equipment are capable of simulating the types of conditions a product may face while in use...
A humidity chamber is a mechanism that examines how products react when exposed to variations in humidity. This type of environmental testing is used by manufacturers to test the various parameters of their products in the harshest of conditions...
Stability chambers and rooms are climate-controlled environments that provide stable conditions for testing and storage. These specialized environmental chambers offer a precise, raised temperature or humidity to ascertain whether a...
A test chamber is a managed and controlled environment used to test the endurance, stability, and practicality of equipment, products, and chemicals. They are a controlled enclosure that mimics the effects of environmental conditions that a product may encounter during its usage...
Thermal shock chambers are climatic chambers for thermal shock testing that are utilized to put the material to serious shocks. This is accomplished through the repeated and sudden passage to low temperature areas from...
A vacuum chamber removes air and pressure from a confined enclosure to test the effects of a vacuum on parts, materials, components, and assemblies. It can also be used to test the performance of applications for manufacturing operations...
The purpose of an environmental testing chamber is to examine the effects of a variety of climactic, physical, and other unique conditions on a product. They are designed to create environments that a product may encounter during its use...
A cleanroom is a specially designed enclosed space where airborne particulates have been limited or removed by a highly sophisticated filtration system. They are used by industries that require a highly controlled and monitored environment for the production...
Cleanroom products are specially designed and engineered to prevent the contamination and pollution of highly sensitive cleanroom environments. For a cleanroom to receive its level of classification, it is required to be cleaned, constructed, and sanitized to meet a list of qualifying conditions and standards....
A HEPA filter is a high efficiency pleated air filter capable of capturing extremely small particulate matter down to particles that are the size of a micron (µ), or a micrometer, which is 1/1000th of a meter...
Modular buildings are buildings made up of standardized sections, called "modules," manufactured in a controlled environment of a factory away from the building's future location. The common factory-made, standard modules include walls...
A modular clean room is a prefabricated, controlled environment that is constructed to limit the presence of sub-micron particulates. These specially designed rooms are assembled using prefabricated panels inserted into a frame. They are purchased as a kit to be assembled or can be constructed by a technician...
A portable cleanroom is a compact system that requires little space, provides mobility, is cost effective, and offers exceptional clean and filtered airflow to create an uncontaminated and sanitized environment. They are a modular designed room where...
A portable office is a mobile workspace that can be easily assembled and placed to provide a quiet and convenient location for meetings, completing paperwork, or examining plans. They are built using...
Prefabricated buildings, or prefabs, are buildings with components (walls, roof, and floor) that are manufactured in a factory or manufacturing plant. These components can be fully or partially assembled in a factory which is then transferred at the construction site...
A softwall cleanroom is a confined controlled space with a metal frame, clear panel walls, an entrance, high efficiency particulate air (HEPA) filters, and exceptional lighting that is designed to provide a contaminant and particulate matter free workspace...
A cleanroom is a specially designed and configured room that has been constructed to eliminate dust particulates and atmospheric contaminants. They are commonly used for scientific research, pharmaceutical production, and other industries that produce products that can be damaged by unsanitary or polluted conditions...