AC DC Power Supply
Power supplies are electrical circuits and devices that are designed to convert mains power or electricity from any electric source to specific values of voltage and current for the target device...
AC Power Supplies: Uses and Features
Introduction
This article takes an in-depth look at AC power supplies.
Read further and learn more about topics such as:
- What are AC power supplies?
- Nature of Alternating Current
- Single-Phase and Three-Phase AC Power Supplies
- AC to AC converters
- Power inverters
- Uninterruptible power supply (UPS)
- AC to AC adapters
- Programmable Power Supplies
- And much more...
Chapter 1: Understanding AC Power Supplies
An AC power supply is a specific type of power supply designed to provide alternating current (AC) electricity to an electrical load. It can accept input power in either AC or DC form. The electricity supplied by mains outlets and some power storage systems is often unsuitable for the requirements of specific loads. To resolve this, an AC power supply converts and adjusts AC electricity from the source to match the voltage, current, and frequency specifications necessary for the particular device. This is achieved through voltage transformation, followed by a filtering process, ensuring the device receives electrical power in a precise and regulated fashion.
Additionally, AC power supplies have the capability to modify the voltage level delivered to the load, while also ensuring that the current drawn remains within safe operational limits.
Chapter 2: What is alternating current?
Alternating current (AC) is a fundamental concept in electrical engineering and power transmission. AC refers to a type of electrical power in which the flow of electric current reverses direction periodically, as opposed to flowing steadily in one direction. Consequently, the voltage alternates its polarity over time. This unique behavior is achieved through an AC generator, which leverages the principle of electromagnetic induction. In typical AC generation, a rotating conductor (rotor) moves through stationary magnetic fields (stator) within the generator, inducing an alternating voltage and producing alternating current.
AC stands in sharp contrast to direct current (DC), where both the polarity and direction of the current stay consistent over time. While DC is common in battery-powered electronics, AC is the dominant form for power distribution in electrical grids due to its transmission efficiency and compatibility with electrical transformers.
AC Waveforms
A waveform visually represents the magnitude and direction of electrical current or voltage over time. AC waveforms are plotted by showing instantaneous values of current or voltage versus time. The most common and significant AC waveform is the sinusoidal waveform, or sine wave, renowned for its smooth, repetitive oscillation and efficiency in energy transfer. Other forms of AC waveforms include triangular, square, and sawtooth waveforms, each of which finds application in various industrial and electronic circuits such as signal processing and switching power supplies.
Sine waves exhibit a continuous, smooth, and periodic oscillation, easily identified by their S-shaped curve that fluctuates above and below a zero baseline. In a plot of a sine wave, the x-axis represents time, typically measured in degrees or seconds, while the y-axis denotes voltage or current. A single full cycle is completed when the wave traces its motion from 0° to 360° (or from 0 to 2π radians).
AC sine waves can be described using the mathematical equation: A(t) = Amax sin (2Ï€ft), where Amax is the amplitude, f is frequency, and t is time.
Several vital AC parameters are derived from the sinusoidal waveform, shaping how electricity is measured and applied in electrical engineering, power electronics, and utility grids:
- Amplitude (Amax) refers to the maximum voltage or current value that the AC waveform reaches. It also corresponds to the intensity of voltage or current, shown as the highest and lowest points (peaks and troughs) on the sine wave. On the graph, these are at the 90° and 270° x-coordinates. When the waveform is at the trough, amplitude will have a negative sign, which simply indicates the flow direction has reversed, not that the current or voltage is less than zero. The maximum voltage in an AC waveform is called �peak voltage�.
- Frequency (f) is the count of wave cycles that repeat per second, measured in Hertz (Hz). Frequency is one of the chief specifications in AC power systems. The frequency determines the rate at which alternating current completes one oscillation and is critical in designing electrical devices and synchronization of power systems.
- Period (T) is the time duration of a single cycle, mathematically equal to 1/frequency. Higher frequency signals have correspondingly shorter periods.
- Mean voltage and current reflect the average instantaneous voltage and current over a full AC cycle. In a perfect sine wave, mean values are zero due to symmetrical oscillation above and below the zero axis, unless a DC offset exists (known as a superimposed DC component).
- Root-mean-square (RMS) voltage and current represent the effective or equivalent DC value that would dissipate the same energy as the AC signal. RMS values are essential for practical electric power calculations, such as rating household electronics or industrial motors. For a sine wave, the RMS voltage equals the peak voltage divided by the square root of two. Electricians and engineers use this value for measuring, specifying, and troubleshooting AC electrical systems.
- Phase difference (φ) quantifies the angular separation between multiple waveforms, influencing how electrical equipment like motors or generators operate in a three-phase AC system. Phase relationships are crucial in industrial power distribution, polyphase systems, and power factor correction.
Applications of Alternating Current
Alternating current electricity is at the core of modern infrastructure. Nearly all electrical power produced by power plants—including those using fossil fuels, nuclear, hydroelectric, wind, or solar sources—is generated and distributed as AC by national and regional electrical grids. AC allows for cost-effective and efficient long-distance power transmission because its voltage can be easily transformed to higher or lower levels using electric transformers. This voltage regulation is key in minimizing transmission losses and ensuring safe delivery to homes and industrial facilities. Transformers only function with AC, relying on its periodically reversing current for electromagnetic induction.
AC power is directly used by an extensive range of electrical appliances and equipment, including lighting (LEDs, lamps), HVAC systems, motors, televisions, refrigerators, and most industrial machinery. While AC is the standard for the electrical grid and building wiring, direct current (DC) is still essential in consumer electronics (like smartphones, laptops, and battery-powered devices), where AC must be converted to DC using rectifiers or AC-DC adapters.
The frequency and voltage of AC power supplied by electrical utilities differs by nation or region. For instance, in the United States, the standard frequency is 60 Hz and common household voltage is 120 volts AC (VAC). In many other countries, such as those in Europe and Asia, the standard is 50 Hz with 220�240 VAC. This variation is vital to recognize when importing or traveling with electronic devices internationally, as using the incorrect voltage or frequency can cause electrical failures or device damage.
Specialized AC power supplies—such as power inverters, voltage converters, and step-down/step-up transformers—enable compatibility between devices and local power standards. Reliable power quality and the correct input voltage are crucial for the safe, efficient operation of electrical tools, industrial machines, and sensitive electronics. Before plugging in, always verify the rated power requirements of your power supply and devices to avoid costly damage and ensure optimal performance in your regional electrical system.
As renewable energy sources like solar panels and wind turbines become more prevalent, modern power systems increasingly rely on flexible AC power conditioning and conversion equipment (such as inverters, uninterruptible power supplies, and smart grid components). These advanced technologies help deliver consistent, safe, and efficient AC power for both residential and industrial applications, highlighting the enduring value and adaptability of alternating current in the evolving global energy landscape.
Leading Manufacturers and Suppliers
Chapter 3: What are the differences between single-phase and three-phase AC power supplies?
AC power supplies are classified into two types: single-phase and three-phase power supplies.
Single-Phase Power Supply
A single-phase power supply comprises two conductors: the phase wire and the neutral wire. AC electricity flows from the phase wire to the load, and after passing through the load, it returns to the source via the neutral wire. This type of power supply has a simpler design than a three-phase system and requires fewer conductors.
Single-phase power is illustrated by a sine wave, completing one full cycle at 360°. The wave reaches its positive peak at 90° and its negative peak at 270°. Due to the varying voltage, the power delivery is not constant.
Single-phase power supplies are suitable for devices and equipment with low power demands. They are commonly used in residential settings to power appliances like fans, coolers, small air conditioners, and lamps. However, they are not adequate for operating large industrial machinery.
Three-Phase Power Supply
Three-phase power supplies typically involve three conductors that carry current. These systems can be configured in either a wye or delta arrangement, with a neutral wire present in wye configurations.
In a three-phase power system, three sine waves represent the three conductors, each phase shifted by 120° relative to the others. All three phases share the same frequency and amplitude. In this system, the waves reach their peak voltage twice per cycle, and the overall voltage never drops to zero. This results in a continuous and nearly constant flow of electrical power to the load. Three-phase power systems offer greater efficiency compared to single-phase systems when handling the same load.
Three-phase power systems are used in heavy-duty industrial equipment which has large power requirements. They are commonly used for power pumps, electric heaters, motors, and others. They are more economical to operate.
Chapter 4: What are AC to AC converters?
AC to AC converters adjust the input AC power to match the specific frequency, voltage, and phase requirements of a device. The main types of AC to AC converters include:
DC-Linked AC to AC Converters
DC-linked AC to AC converters use a rectifier and a DC-link to first rectify and smoothen the supplied AC power into DC. The DC-link capacitor bridges the power source and the inverter and acts as a load-balancing energy storage device that regulates the voltage and prevents voltage spikes and EMI in the inverter. Once the current is transformed into DC, the inverter will convert it back to AC with the required output frequency and voltage. These converters have two types:
- Current Source Inverter (CSI) Converter
- Voltage Source Inverter (VSI) Converter
Cycloconverters
Cycloconverters change AC power from one frequency to an output with a lower frequency directly. Unlike other types of converters, cycloconverters do not convert the AC to DC as an intermediate step, which helps reduce costs and minimize losses.
Chapter 5: What are power inverters?
Power inverters or DC to AC inverters are types of AC power supply that convert an input low-voltage direct current into a useful alternating current that can run AC electronic devices. It is used in portable and emergency power sources. Power inverters allow you to utilize the DC power from batteries, fuel cells, and renewable energy sources to operate vehicles, appliances, and other electronics requiring AC power. Power inverters are the opposite of rectifiers which convert AC to DC current and are commonly used in DC power supplies.
In DC power systems, current flows from the negative terminal of the power source (such as a battery) to the load and then returns to the battery through the positive terminal. Power inverters function by taking DC power and converting it into an oscillating AC signal, reversing its direction and frequency. In older models of power inverters, this conversion process involved several steps to alternate the direction of the incoming DC power:
- Switching the DC repeatedly turns on and off to produce a square-shaped current alternating periodically between zero and the positive amplitude. To achieve the required output frequency, the current needs to be switched 50 to 60 times per second, corresponding to 50 Hz and 60 Hz, respectively.
- Flipping the terminal contacts by a mechanism to reverse the direction of the voltage and current to the negative amplitude.
This method generates a square wave due to the sudden switching of DC power. However, square waves can be problematic for sensitive electronic devices, as they may not offer a consistent power supply. Modern power inverters, such as pure sine wave and modified or quasi sine wave inverters, create a smoother and more gradual alternation of the current.
Pure Sine Wave (PSW) Inverters
Pure Sine Wave (PSW) inverters generate an AC waveform that closely resembles the standard sinusoidal shape of household electricity. They achieve this using specialized electronic components like capacitors, resistors, and transistors (such as MOSFETs), or through a Wien bridge oscillator. PSW inverters are highly compatible with a wide range of electronic devices, including sensitive smart devices that require AC power, ensuring smooth operation. However, they are typically more expensive, often costing twice as much as Modified Sine Wave (MSW) inverters.
Modified or Quasi Sine Wave (MSW) Inverters
Modified Sine Wave (MSW) inverters generate a square-like AC waveform with rounded corners, resembling a pixelated sine wave. These inverters utilize less expensive components, such as diodes and thyristors, making them more affordable than Pure Sine Wave (PSW) inverters. While MSW inverters are suitable for many basic electronic devices, they may not perform well with devices such as clocks, refrigerators, microprocessor-controlled equipment, and medical devices.
Batteries store power in low voltage DC, typically around 12-24 VDC. To provide power to a load that requires a higher AC voltage, usually between 110-240 VAC, the DC power first passes through a transformer within the inverter that steps up the voltage.
Chapter 6: What is an uninterruptible power supply (UPS)?
An uninterruptible power supply (UPS) provides backup or emergency electrical power to a load for a short period of time in case the primary power source drops its voltage or fails. It also protects sensitive equipment from power fluctuation, instantaneous voltage spikes and falls, noise, and harmonic distortion. It is often used in computers, data storage systems, telecommunication systems, industrial equipment, and healthcare facilities; it has a critical role in the healthcare system as it provides backup power for life-supporting equipment found in hospitals, particularly in intensive care units.
An AC to AC UPS delivers output AC power to a load by first converting incoming AC power into DC using a rectifier. This DC power is used to charge a battery, which stores energy for use during a power interruption. When needed, the stored DC power is fed into an inverter, which then converts it back into AC power for the output.
There are three main types of UPS systems:
Online UPS or Double Conversion UPS
In a typical online UPS operation, all incoming AC power is first converted into DC power. Some of this DC power is used to charge the battery via a charge controller circuit. The battery is connected directly to the inverter, while the remaining DC power is supplied to the inverter to provide AC power to the load. Both the rectifier and inverter are continuously active. During a power outage, the battery ensures a constant supply of current without any switching delay, resulting in zero transfer time.
Online UPS systems are ideal for sensitive electronic equipment where even a brief power interruption can cause significant issues. However, because of the multiple power conversion stages, these systems tend to have higher power losses. Additionally, the constant charging requires a large battery, which may have a shorter lifespan due to the continuous charging cycle.
Offline UPS or Standby UPS
In a typical offline UPS operation, most of the incoming AC power is directly supplied to the load, while a portion is converted to DC power to charge the battery. During a power outage, the static transfer switch shifts the power supply to the inverter. The inverter activates only when needed, causing a delay in the flow of AC power to the load. This switching delay can range from 5 to 25 milliseconds.
As a result, offline UPS systems are suited for non-critical devices, such as personal computers, that can handle brief power fluctuations. With fewer power conversions involved, these systems generally experience lower power losses.
Line-Interactive UPS
A line-interactive UPS delivers a regulated voltage output using a variable voltage autotransformer and a filter. It can handle minor over-voltage or under-voltage situations without drawing from the battery's DC power. The battery's stored DC power is utilized only if the power outage extends beyond a brief period.
Transformers are used to either increase or decrease AC voltage to the level required by a device. They are often integrated into various AC power supplies for voltage adjustment. An autotransformer, used in line-interactive UPS systems, features a single winding on a common core, making it both cost-effective and compact. In contrast, an isolation transformer provides AC power to equipment without altering the voltage. Its main function is to shield the equipment from electrical noise and voltage spikes, with both the primary and secondary windings having an equal number of turns.
Chapter 7: What are AC to AC adapters and programmable power supplies?
AC to AC Adapters
An AC to AC adapter is a power supply device that reduces the voltage of alternating current from a mains supply to meet the needs of a load requiring a lower voltage. It effectively transforms the AC power to provide the necessary reduced voltage output.
Commonly referred to as wall plug-in transformers, wall bumps, power cubes, wall adapters, or wall warts, these adapters are housed in a compact plastic casing. To function, they must be plugged into wall outlets, connecting to the mains power supply to draw electrical current.
Programmable Power Supplies
Programmable power supplies are benchtop power supplies that deliver power to a load and can remotely control the output voltage, frequency, and current. They are capable of supplying both AC and DC power. The remote operation of these power supplies is made possible by an analog or digital interface and integral microcomputers to control and monitor the power supply to the device. Programmable power supplies are commonly used in semiconductor fabrication, crystal growth processes, and X-ray generators.
Summary
- AC power supplies are used in supplying alternating current to an electronic device. They transform AC power from the mains power supply or power storage device to an AC power acquiring the right voltage, frequency, current, and form needed by the load. The input of the AC power supply may be AC or DC power.
- Alternating current (AC) is a form of electricity in which the flow of electric current periodically reverses direction. It is the standard form of electricity generated and distributed by power plants and electrical grids.
- An AC to AC converter transforms an AC power to the frequency, voltage, and phase needed by the device.
- Power inverters convert a low-voltage input DC from a power storage device (e.g., battery) into a useful AC power. The types of power inverters are PSW and MSW inverters.
- Uninterruptible power supplies (UPS) provide backup AC power in case of a power interruption. The types of UPS are online or double conversion, offline or standby, and line-interactive UPS.
- Transformers and AC to AC adapters are used in stepping up or stepping down the AC voltage supplied to the load.
- A programmable power supply is used to remotely control and deliver power supply to a load.
