The contents of this article is everything you need to know about lab benches and their use.
You will learn:
A laboratory bench is a customized table crafted to support various lab tasks and experiments, including the management of reagents and test specimens. During the creation of lab benches, attention is given to including finishes that withstand corrosion and reduce vibrations, both of which could negatively impact test outcomes and experiment precision.
Often serving as the pivotal element of a research lab, lab benches are typically the largest, sturdiest, and most essential items found in experimental, R&D, and scientific environments. They guarantee a solid, smooth, and non-porous workspace, complemented with connections and a range of accessories aimed at facilitating the seamless performance of critical activities.
The concept of a "lab bench" encompasses benches engineered to satisfy the particular needs of diverse lab and experimental environments. The selection of the specific lab bench is majorly based on the type of work in progress. A fundamental distinction is made between wet and dry lab benches, dictated by the needed accessories. Dry lab benches commonly offer extensive work surfaces, electrical hookups, and storage both above and below the bench. Conversely, wet lab benches are geared towards liquid processing, featuring racks for vessel storage, sinks for waste management, and comparatively limited work surfaces.
Each piece of laboratory furniture, component, and equipment in a laboratory environment is meticulously selected to meet the specific needs of the lab's activities. The process of lab design starts with choosing the ideal lab bench, which is selected based on the type of scientific work to be performed. A crucial aspect of a laboratory bench is its work surface, which can be engineered for either wet or dry laboratory procedures, depending on chemical or biological research requirements.
Lab benches are central to laboratory operations, providing durable and functional workspaces for scientific experiments and sample preparation, except in cases where experiments require special environments for large equipment or hazardous fumes, or cannot be performed on a horizontal surface. While they may appear to be simple flat tables, modern laboratory benches are equipped with integrated storage, utilities, and specialized accessories that support a wide range of laboratory tasks and workflows, which would be impractical or even damaging on standard workbenches or office desks.
Lab benches can be classified using three defining methods: by function, structure, and purpose. Each classification is further divided into subcategories that detail specific configurations and features, ensuring the bench supports laboratory safety, workflow efficiency, and compliance with lab standards.
Functional classifications are based on the type of lab work a bench supports and include:
There is often overlap between biological and chemical lab benches, as many biological benches must also withstand chemical exposure and provide utility integration, such as gas, water, and vacuum services essential for varied laboratory procedures.
Classifying lab benches by structure acknowledges the diversity of custom and modular laboratory furniture systems designed for highly technical and evolving scientific tasks. Generally, lab benches are classified based on their mobility and placement, including:
Material selection for frames and surfaces—ranging from 304/316 stainless steel and powder-coated steel to chemical-resistant laminates—is critical for safety, longevity, and usability, particularly in regulated industries such as pharmaceuticals or industrial research labs.
Organizing lab workbenches by purpose addresses the diverse range of custom laboratory bench designs engineered for specific scientific workflows, processes, and safety requirements. For example, certain lab benches are designed for use in cleanrooms or GMP (Good Manufacturing Practice) facilities. Generally, lab benches can be categorized by their intended purposes, which include:
The main lab bench types—such as island lab benches and sink lab benches—are foundational for most laboratory layouts. In contemporary lab design, lab benches are increasingly tailored to specific research settings, including analytical laboratories, teaching labs, and clinical lab environments.
Lab benches are also categorized based on the materials used in their work surfaces and frameworks, such as stainless steel, epoxy resin, phenolic resin, steel-wood combinations, and even high-durability plastics. Production methods vary as well, reflecting both European and American manufacturing standards, with custom fabrication available for unique install requirements.
A critical feature of every lab bench is the countertop surface, which is carefully selected based on the nature of testing, chemical compatibility, and hygienic requirements. Ideal countertops exhibit high temperature resistance, corrosion and chemical resistance, antimicrobial properties, and a firm, non-porous surface to meet the demands of both research and industrial laboratory applications.
Traditional lab benches are designed for general laboratory use, featuring robust support structures engineered to handle heavy loads and frequent use. Their countertops vary depending on the specific tasks, from basic chemical-resistant laminate to advanced epoxy resin. These laboratory benches are versatile, suitable for most laboratory environments where sinks or special containment aren't required. Traditional models are cost-effective and usually not tailored for unique hazards or specialized workflows, making them ideal for academic labs, quality control labs, and technical training centers.
These benches can be mobile or fixed, with various surface sizes, typically ranging from 36 inches to 96 inches (91 cm to 243 cm)—supporting flexible lab arrangements and easy reconfiguration. Their general-purpose design allows for access from multiple sides, optimizing material handling, collaboration, and equipment utilization.
Traditional laboratory benches remain highly reliable, constructed to meet stringent safety and durability standards. Their resemblance to sturdy tables enables seamless integration in a variety of laboratory settings.
The evolution of modern scientific research and technological development has created a significant demand for custom lab workbenches. Certain procedures, cutting-edge experiments, and niche applications require benches engineered with unique specifications. Custom laboratory workbenches are increasingly preferred as many traditional models may lack features critical for advanced pharmaceutical, chemical, or electronics research.
Every detail of a custom lab workstation—from ergonomic configurations to safety and utility integration—is scrutinized and tailored during the design and manufacturing process. Custom features can include height-adjustable worktops, modular utility raceways, specialized ESD surfaces, integrated fume extraction, advanced storage solutions, or climate control capabilities. Material choices, such as powder-coated steel frames, stainless steel, or specialty laminates, are made to ensure chemical compatibility, durability, and compliance with laboratory safety standards.
Quality of construction and work surface materials can greatly affect research outcomes and operational safety. Poorly configured or constructed workbenches risk compromising the integrity of sensitive studies or even imperiling lab personnel. Close collaboration between laboratory planners, end users, and manufacturers ensures the final product is tailored perfectly for both current experiments and evolving research needs.
Additional considerations for custom benches often include compliance with laboratory safety standards (such as OSHA or ISO requirements), incorporation of anti-vibration features for sensitive instruments, and the use of antimicrobial and easy-to-clean materials for biosafety or clinical labs.
Electrostatic discharge (ESD) lab benches address a critical workplace hazard: the uncontrolled transfer of static electricity, which can disrupt sensitive electronics, contaminate cleanroom environments, and pose risks in laboratories working with flammable substances. These specialized benches are essential for electronics laboratories, microchip manufacturing, semiconductor testing, and other precision electronic applications.
Featuring ESD laminate materials with embedded carbon layers, these laboratory benches safely dissipate static discharges. They are engineered to manage up to 100,000 ohms, with worktops, shelving, and accessories continuously grounded via steel supports and grounded bolts. This setup protects delicate electronic components, maintains product quality, and meets ESD compliance requirements set by regulatory bodies like ANSI/ESD S20.20.
Mobile lab benches offer scalable flexibility for dynamic laboratory spaces. Easily repositionable and capable of supporting heavy laboratory equipment (up to 600 lbs. or 272 kg), these benches save costs, simplify installation, and allow laboratories to reconfigure work areas as research requirements or staffing needs change. Mobile lab benches are ideal in multi-purpose labs, research institutions, educational settings, and cleanrooms requiring frequent reorganization for different projects or processes.
Engineered for convenience, these benches are equipped with robust castors, adjustable shelving, integrated power strips, and modular storage. However, due to their mobility, plumbing integration and sinks are typically unavailable, making them best suited for dry laboratories or peripheral workspaces in larger facilities. Mobile lab benches remain a preferred choice for laboratories focused on efficiency, workflow flexibility, and rapid adaptation to new technologies or research needs.
Some laboratories, particularly those with limited floor space or modular construction requirements, benefit from wall-mounted lab benches (also called suspended benches). These economical lab fixtures free up central workspace, create accessible walkways, and enable flexible equipment placement for scientific experiments and analysis.
Wall-mounted benches often incorporate plumbing, electrical, and data connections within the wall mounting, enabling highly customized, space-efficient layouts. Modular design allows for reconfiguration, including swapping countertops, adding upper shelving, and integrating cabinetry. These benches commonly feature sinks and drying racks—essential for wet lab environments. Countertops are typically made from ceramic or stainless steel for exceptional chemical and water resistance, meeting hygiene and safety standards required in high-throughput or clinical laboratories.
Dry lab benches are designed for settings that focus on computational, analytical, and electronic work rather than experimental manipulation of liquids or hazardous chemicals. Common in data analysis labs, physics departments, engineering labs, and electronics testing environments, these benches provide stable, level, and non-conductive surfaces for sensitive equipment.
Core features include integrated power management, shelving for instruments, monitor stands, and extensive cable management solutions. Benchtops are made from wood, durable plastics, or chemical-resistant laminate—materials chosen for durability, ease of cleaning, and minimal electrostatic buildup. Dry lab workbenches emphasize ergonomic design to optimize comfort during extended periods of data collection, programming, or analysis, aligning with broader laboratory design trends prioritizing worker health and efficiency.
In contrast, wet lab benches are engineered for laboratory environments where manipulation of chemicals, biological agents, and liquids pose greater risk. Used extensively in life sciences, biotechnology, pharmaceutical development, and chemical analysis, wet lab benches support sample preparation, mixing, titration, and cleaning operations that require robust chemical resistance and integrated waste management.
Key features include corrosion-resistant and non-porous countertops (commonly epoxy resin, phenolic resin, or stainless steel), integrated sinks, splash guards, and access to plumbing and drainage. Storage is includes for reagents and safety PPE. Central benches are typically installed with fixed utilities to ensure safe, compliant waste disposal and to support high-activity experimental areas. Wall-mounted and mobile benches in wet labs serve supplementary roles for storage and workflow optimization.
These benches are also designed with spill containment features, anti-microbial coatings, and chemical-resistant surfaces, in accordance with biosafety and quality assurance protocols central to regulated industries.
Ergonomic lab benches are designed to address the growing concerns about laboratory worker safety, productivity, and comfort. Poorly designed workstations can contribute to repetitive strain injuries, musculoskeletal disorders, and decreased productivity. As awareness of occupational health expands, lab bench manufacturers now offer manual or electronic height-adjustable benches and modular accessories to accommodate different body types and work styles.
Modern ergonomic laboratory benches ensure stable, customizable work surfaces. Adjustments can be made to height, depth, and width, enhancing efficiency for various scientific tasks—ranging from repetitive pipetting to heavy equipment handling. The optimal surface height is dictated by factors such as equipment footprint, experiment complexity, assembly techniques, and whether seated or standing work is required.
After extensive research, laboratory furniture manufacturers have documented the following benefits for ergonomic lab benches:
Injury Prevention: Adjustable, supportive design greatly reduces risk of laboratory-related injuries such as carpal tunnel syndrome and lower back pain.
Comfort and Efficiency: Improved fit for users decreases fatigue and enhances focus during long experiments and data analysis sessions.
Cost Savings: Although initial investments may be higher, reduced health issues and increased productivity offset long-term costs.
Adaptability: The flexibility of ergonomic benches makes them a universal choice, supporting various laboratory setups from research to teaching and industrial labs.
Other trends include integration of anti-fatigue mats, sit-stand configurations, and smart features for workflow tracking—further aligning ergonomic benches with broader digital laboratory transformation goals.
Laboratory tables serve as versatile, multipurpose surfaces in research and production environments. Unlike specialized laboratory benches, lab tables offer enhanced flexibility, portability, and adaptability to a variety of settings, including chemistry labs, physics classrooms, and materials analysis facilities. Their primary use is as adjustable work surfaces for equipment setup, experimentation, and auxiliary functions within a laboratory environment.
When choosing laboratory tables, key considerations include intended applications, durability requirements, surface properties (such as chemical- or spill-resistance), and integrated features. Typical components include:
Lab tables can be constructed with materials appropriate for either dry or wet lab settings, such as high-pressure laminate, epoxy resin, or stainless steel, meeting the requirements of both everyday use and specialized laboratory applications.
Vibration isolation laboratory tables are essential for facilities using sensitive analytical or testing equipment—such as precision balances, microscopes, spectrometers, or medical diagnostics instruments. External vibrations from HVAC systems, building traffic, or mechanical equipment can compromise measurement accuracy, making vibration-dampening solutions critical for scientific research, quality control, and industrial applications.
These tables feature state-of-the-art air isolation legs or pneumatic stabilizers, delivering passive vibration control across a broad frequency range (typically 1Hz to 10Hz). Countertops are often composed of dense stone or composite with steel support structures, with regulated air or nitrogen pressure maintaining stability. Accessories include retractable casters for mobility, adjustable workstation height, and integrated power solutions for operating electronic lab instruments.
Additional customizations—such as keyboard and monitor support, modular shelving, and cable management—make vibration isolation lab tables indispensable in high-precision environments seeking optimal instrument performance and reliable experimental data.
Lab benches are crucial components in any laboratory, providing the necessary support for various tasks. The requirements for lab benches can differ significantly between dry and wet labs, with wet labs often having more rigorous specifications. The choice of materials used in constructing lab benches is a fundamental aspect of their design and functionality.
Two main factors to consider when constructing a lab bench are the countertop material and the frame or base. The type of countertop material distinguishes one lab bench from another, while the frame or base determines the bench's load-bearing capacity. As the strength and durability of the materials used in the frame and countertop increase, so do the capabilities of the lab bench.
When selecting a lab bench, the material used for the countertop is a primary consideration. The countertop is the main work surface, and it must be non-porous to protect equipment and ensure stability. Countertops are typically made from resilient materials that are easy to clean and disinfect.
Epoxy resin is created from a reaction between two polymers, resulting in a tough, solid surface. It is favored for lab bench countertops due to its durability and aesthetic qualities. Epoxy resin surfaces are resistant to chemicals, UV light, impacts, and shocks, making them suitable for wet lab environments. The durability and resistance of epoxy resin contribute to its longevity and robustness.
The visual appeal of epoxy resin countertops comes from their high gloss finish, which enhances light reflection and simplifies cleaning. Properly applied, epoxy resin creates a seamless, smooth, and sleek surface that effectively seals any pores.
Phenolic resins are synthetic polymers formed from phenol and formaldehyde reactions. These resins are used for lab countertops and are comparable to epoxy resin but generally offer less durability, making them suitable for lighter tasks. Phenolic resin countertops provide a smooth, seamless finish and are resistant to chemicals, bacteria, and fungi.
While epoxy resin is often preferred, phenolic resin can serve as a cost-effective alternative, offering about 90% of the properties of epoxy resin at a lower price. Epoxy resin typically costs between $100 and $200 per square foot, whereas phenolic resin ranges from $15 to $18 per square foot. Phenolic resin is commonly used in labs where contamination control is critical.
Phenolic resin countertops are made by impregnating kraft paper with phenolic resin and then heating the mixture to produce a strong, lightweight material. This material is resistant to bacteria, chemicals, and moisture, as well as to corrosion and temperatures up to 350°F (177°C).
Stainless steel is renowned for its robustness, resistance to corrosion and rust, and exceptional longevity, making it a popular choice for lab workbench countertops. The material's inherent strength and durability are key factors in its selection for demanding laboratory environments. Among countertop options, stainless steel stands out for its ease of maintenance and enduring quality. Its oxide layer acts as a protective barrier, safeguarding against scratches, chips, and impact damage. This makes stainless steel particularly suited for high-stress applications.
Featuring an exceptionally smooth surface, stainless steel countertops can endure temperatures up to 1400°F (760°C). They are built to last and typically do not require replacement. Stainless steel retains its strong, smooth, and resilient finish across various environmental conditions. However, the primary disadvantage is its cost, which ranges from $80 to $225 per square foot, making it more expensive than most other materials, except for ceramic countertops, which are even pricier.
Polypropylene countertops offer notable advantages such as being lightweight and highly resistant to acids, bases, and solvents, making them suitable for handling aggressive chemicals like hydrofluoric acid. These lab benches are stain-resistant and are constructed from sheets ranging from half an inch to one inch thick, which are thermally welded to ensure a secure, durable bond. While white is the most commonly used color for polypropylene lab benches due to its aesthetic appeal, black and natural hues are also available.
This rigid plastic, derived from the polymerization of propylene monomer, is favored in laboratory settings for its resistance to corrosion, chemicals, and moisture. Polypropylene's flexibility and toughness help it resist cracking and stress, with a melting point of 327°F (164°C). Additionally, polypropylene is recyclable at the end of its life cycle, contributing to its environmental sustainability.
ESD work surfaces are one of the best types of work surfaces if there is a concern about static interference in the performance of a laboratory experiment or procedure. It is caused by friction that can be dissipated using an ESD laminate work surface. Electrostatic discharge happens when objects rub together and give off electrons, which causes one object to become positively charged while the other is negatively charged. The result of the interaction is an imbalance that causes charges to build up on the surface of the charged object.
Accumulated static charges can adversely affect measurements, such as material weights, cleanroom specifications, and safety standards. To manage and dissipate these charges, lab bench countertops are equipped with ESD laminate, which consists of high-pressure laminate layered with carbon to effectively control electrostatic discharge.
In industrial environments, electrostatic discharge poses significant risks, including the potential ignition of flammable chemicals, malfunctions in sensitive equipment, and attraction of contaminants. Since electrostatic discharge is imperceptible until damage occurs, ESD countertops are essential. These surfaces are designed to establish a zero potential ground, ensuring that static electricity is safely channeled away from the work area. The ESD laminate provides a conductive, ESD-safe barrier that directs and mitigates static charges, protecting both the equipment and the experiments being conducted.
Laminate countertops are constructed from multiple layers of paper impregnated with phenolic resin. These layers are fused to the lab bench surface through a thermosetting process that utilizes both heat and pressure to create a durable, permanent bond. This construction results in a surface that is highly resistant to fire, abrasion, and tearing. Like phenolic resin, laminate countertops are a cost-effective option, providing good performance at a lower price point.
However, high-pressure laminate countertops are not ideal for wet lab environments due to their susceptibility to damage from acids. Concentrated acids, such as hydrochloric, nitric, and sulfuric acids, can cause irreversible harm to the laminate, making it unsuitable for applications where such chemicals are frequently used.
Ceramic lab bench countertops are viewed as the supreme form of countertop due to their many benefits. They are more expensive than stainless steel and just as long lasting as stainless steel. Ceramic countertops are made of a combination of kaolin, clay, porcelain stone, porcelain clay, lime glaze, and lime alkali glaze. Lab benches made with ceramic countertops are valued for their resistance to temperatures that can reach 2732°F (1500°C), which far exceeds the strength of any of the other high quality lab benches.
Ceramic lab benches are renowned for their exceptional durability, making them well-suited for environments where exposure to acids and alkalis is common. Ceramic countertops are impervious to all types of acids and alkalis, offering robust protection in such settings. Additional benefits of ceramic countertops include resistance to scratching, antibacterial properties, high hardness, impact resistance, immunity to pollution, anti-aging characteristics, non-flammability, and resilience against radiation.
The countertop is a fundamental component of a lab bench, providing the essential surface for conducting laboratory tasks. Equally important are the supports that uphold the countertop and bear the weight placed on it, known as the lab bench frame. There are several common frame types used in lab benches, including L-frame, P-frame, A-frame, U-frame, C-frame, cantilever, suspended, and H-frame. Each frame type influences the load-bearing capacity of the lab bench. The overall strength and durability of the frame depend significantly on the quality of the welds used in the frame's construction.
| Lab Bench Frame Types | |
|---|---|
| Frame Type | Description |
| C-Frame | A supporting floor-based leg assembly designed in a C-shape to support a surface. It provides a modern appearance and helps maximize storage space. |
| H-Frame | A floor-based frame system, shaped in the form of H. It's a classic frame system suited for mounting heavy bench equipment. |
| L-Frame | A supporting floor-based leg assembly shaped in a L-shape. It is commonly used for corners. |
| P-Frame | A system consisting of an enclosed utility chase supported by p-shaped support legs. The p-shaped support legs are either fixed in height or height adjustable through a telescoping inner leg member. |
| A-Frame | An A-frame support for a lab bench is similar to the H-frame. It has two supports of similar length at an angle of 45° or less. |
| U-Frame | U-frame supports have the shape of the letter U with the base of the support being the bottom of the U with the sides of the U shape being the legs that are attached to the bottom of the work surface. |
| Cantilever Frame | A bracket or frame supporting a surface tied to a support structure. It provides a modern, minimalistic appearance, and frees up the floor space. |
| Suspended Frame | Typically referring to casework and laboratory furniture accessories suspended from a frame and/or rail system. They are well-suited for laboratories requiring high levels of hygiene, as the area underneath can be cleaned easily. |
The C-frame is known for its exceptional sturdiness, featuring square or rectangular tubes configured to form a shape resembling the letter C when viewed from the side. The frame's legs span the width of the work surface, while the vertical back of the C provides the primary support and height of the lab bench.
When storage modules are incorporated into a C-frame, they are suspended from the top leg of the C. This design facilitates easy cleaning beneath the lab bench. Additionally, most C-frame setups allow for flexible rearrangement and adjustment of modules to meet the specific needs of the lab bench user.
The H-type frame is designed to offer robust stability for mobile lab benches and analytical workstations. This frame can support up to 1100 lbs. (500 kg) and is particularly suited for holding precision instruments. Its legs are firmly anchored to the floor, with the load capacity largely influenced by the materials used in their construction. The structure includes a crossbar that spans between the legs, creating the H shape, and is positioned at various heights along the legs to support the work surface.
A cantilever frame lab bench features H-type legs that are anchored to a wall. Two horizontal arms extend from the top of these legs, supporting the work surface. This design is ideal for tasks involving electronics or computer work, offering a clean, accessible workspace. However, it is not designed for heavy equipment. The height of the work surface is adjustable, allowing for stools or chairs to be positioned underneath when the bench is not in use.
A suspended lab bench frame is affixed to the walls of a laboratory via rails or supports. This type of frame is commonly used in wall-mounted lab benches, particularly in spaces with limited floor area. The rails feature notches for attaching various components such as shelving, work surfaces, cabinets, and cupboards. While suspended frames typically have a lower load-bearing capacity, they offer exceptional ease of access and flexibility in configuration.
The frame of U-type frame lab bench supports is formed by twisting a single length of galvanized steel into the shape of the letter U. The horizontal and vertical sections are one solid piece of 2 mm (0.08 in) thick steel that is bent at a 90° angle at two parts of the tubing. The resulting shape has superior strength, weight bearing capabilities, and a firm solid base. To support the countertop, a small portion of the top of each leg of the U is further twisted 90°. Holes are drilled in the twisted part at the top of the legs to attach the countertop. Depending on the requirements for the lab bench, a cross bar may be added at the back of the U shapes to connect the set of supports. If mobility is required for the lab bench, casters can be added at the bottom, corners of the U-shaped supports.
Lab bench accessories allow for customization of various bench types, regardless of their frame or countertop materials. These accessories cater to the specific requirements of different industries and types of work. A key accessory is computer support, which can accommodate laptops or PCs and may include monitor arms for extended screens.
LED Lighting � LED lighting is commonly integrated into permanent lab benches to enhance visibility on the work surface.
Monitor Arms � Monitor arms come in various lengths and sizes to support different screen configurations. They are frequently included with lab benches or can be added as needed.
Keyboard Tray � Keyboard trays are often attached to monitor arms or stand-alone mounts. For laptops, trays may be designed to fit the laptop’s form and can include features such as wireless connectivity to monitors.
Power Manifold or Power Strip � Power manifolds are essential for providing electrical outlets and data ports on lab benches, including mobile versions. They improve workspace efficiency by centralizing power and connectivity.
Shelves � Shelves are commonly added to lab benches based on the specific needs of the work being conducted. The bench’s design will determine whether shelves can be included.
Cupboards � Storage cupboards may be part of the lab bench design or added separately, depending on the bench’s structure and storage needs.
Storage Cubbies � For laboratories dealing with electronics or delicate components, small organizational cubbies or bins help manage various parts and connectors. These are useful for maintaining organization and protecting sensitive items.
Fume Hood � In labs handling hazardous chemicals, fume hoods provide a controlled environment to manage fumes and protect users. These enclosed systems, which include ducting and filtration, are essential for cleanrooms and specific wet labs to safely handle and exhaust harmful substances.
This list of accessories represents just a fraction of the options available to enhance lab benches, underscoring the need for a diverse range of features to support various research and testing activities effectively.
An adjustable work bench is a tool that allows the user to adjust and regulate the height of the work surface to a more ergonomic and comfortable position for the safe and effortless performance of work...
A portable workbench is a flexible and mobile work surface that is designed to function in multiple environments for the purpose of preparing, constructing, or servicing a wide variety of industrial and commercial applications...
A workbench is a sturdy flat, smooth, molded surface that comes in a variety of sizes designed for specific tasks. They can be very complex for engineering design work, complicated machining, and intricate precision tooling or be a highly finished wood table for woodworking, metal work, and project design...
Metal shelving is storage space with compartments and partitions where tools, equipment, books and files are packed in or where some chemicals in laboratories are packed in. Metal shelving is an invention that offers storage solutions for a diversity of industries...
A mezzanine is an intermediate floor installed in a building between the main floor and the ceiling that is partly open to the main floor. They have a low ceiling and project out over the main floor but do not completely cover it...
A mezzanine floor is a middle floor that is installed between the ceiling and the ground floor to provide extra space for storage, assembly operations, or office space. The normal design for a mezzanine floor is 25% of the flooring of a building or smaller...
Modular buildings are buildings made up of standardized sections, called "modules," manufactured in a controlled environment of a factory away from the building's future location. The common factory-made, standard modules include walls...
A pallet rack is an upright structure made of steel framing with beams and connectors that are bolted, welded, or clipped together to form a shelving unit to store inventory and equipment. In warehousing, pallet racks are...
A portable office is a mobile workspace that can be easily assembled and placed to provide a quiet and convenient location for meetings, completing paperwork, or examining plans. They are built using...
Prefabricated buildings, or prefabs, are buildings with components (walls, roof, and floor) that are manufactured in a factory or manufacturing plant. These components can be fully or partially assembled in a factory which is then transferred at the construction site...
Storage rack, also known as racking, is a structure that stores items and materials and comprises at least two upright (vertical) frames, horizontal beams, and some sort of decking (bars, panels, meshes, or none)...
Warehouse racking, also known as storage or pallet racking, is a material handling system suitable for mass storage of goods unitized on skids or pallets. It allows efficient utilization of space while providing easy access to stockpiled items for better inventory control...
A work equipment platform is an elevated platform or surface in a manufacturing or production site that provides easy access to equipment and machinery. The raised space of a work equipment platform...